http://www.linux-vserver.org/api.php?action=feedcontributions&user=195.254.225.136&feedformat=atomLinux-VServer - User contributions [en]2024-03-19T12:16:51ZUser contributionsMediaWiki 1.20.2http://www.linux-vserver.org/IPv6IPv62010-07-15T14:46:36Z<p>195.254.225.136: </p>
<hr />
<div>At the time of this writing, IPv6 support in guests requires you to apply an additional patch on top of the Linux-VServer patch. The IPv6 patch can be fetched from the official source: [http://people.linux-vserver.org/~bonbons/ipv6/ Bruno Prémont's IPv6 patches], and sometimes rediffs against later kernels are available from [http://people.linux-vserver.org/~dhozac/p/k/ my patch directory].<br />
<br />
To use the patch, you need util-vserver 0.30.212 or newer. These versions support IPv6 natively, so you just need to put the address in <code>/etc/vservers/<guest>/interfaces/X/ip</code> and start the guest to get it an IPv6 address. You should also put "64" (or whatever bitmask has been assigned to you with your prefix) in <code>/etc/vservers/<guest>/interfaces/X/prefix</code>.<br />
<br />
<br />
Starting with linux-vserver-2.3 IPv6 support is included in the main source code. No need to apply any extra patches. You will need to have util-vserver 0.30.214 or newer if you are using the 2.3+ patches.<br />
<br />
==Dual-Stack==<br />
If you want both IPv6 and IPv4 addresses, just use IPv4 on one interface (e.g. interfaces/0) and create another interface (e.g. interfaces/1) with IPv6.<br />
<br />
== Loopback isolation ==<br />
There is currently no loopback isolation (as it is for IPv4) available for IPv6.</div>195.254.225.136http://www.linux-vserver.org/IPv6IPv62010-07-15T14:44:24Z<p>195.254.225.136: /* Dual-Stack */</p>
<hr />
<div>At the time of this writing, IPv6 support in guests requires you to apply an additional patch on top of the Linux-VServer patch. The IPv6 patch can be fetched from the official source: [http://people.linux-vserver.org/~bonbons/ipv6/ Bruno Prémont's IPv6 patches], and sometimes rediffs against later kernels are available from [http://people.linux-vserver.org/~dhozac/p/k/ my patch directory].<br />
<br />
To use the patch, you need util-vserver 0.30.212 or newer. These versions support IPv6 natively, so you just need to put the address in <code>/etc/vservers/<guest>/interfaces/X/ip</code> and start the guest to get it an IPv6 address.<br />
<br />
<br />
Starting with linux-vserver-2.3 IPv6 support is included in the main source code. No need to apply any extra patches. You will need to have util-vserver 0.30.214 or newer if you are using the 2.3+ patches.<br />
<br />
==Dual-Stack==<br />
If you want both IPv6 and IPv4 addresses, just use IPv4 on one interface (e.g. interfaces/0) and create another interface (e.g. interfaces/1) with IPv6.<br />
<br />
== Loopback isolation ==<br />
There is currently no loopback isolation (as it is for IPv4) available for IPv6.</div>195.254.225.136http://www.linux-vserver.org/IPv6IPv62010-07-15T14:06:53Z<p>195.254.225.136: /* Dual-Stack */</p>
<hr />
<div>At the time of this writing, IPv6 support in guests requires you to apply an additional patch on top of the Linux-VServer patch. The IPv6 patch can be fetched from the official source: [http://people.linux-vserver.org/~bonbons/ipv6/ Bruno Prémont's IPv6 patches], and sometimes rediffs against later kernels are available from [http://people.linux-vserver.org/~dhozac/p/k/ my patch directory].<br />
<br />
To use the patch, you need util-vserver 0.30.212 or newer. These versions support IPv6 natively, so you just need to put the address in <code>/etc/vservers/<guest>/interfaces/X/ip</code> and start the guest to get it an IPv6 address.<br />
<br />
<br />
Starting with linux-vserver-2.3 IPv6 support is included in the main source code. No need to apply any extra patches. You will need to have util-vserver 0.30.214 or newer if you are using the 2.3+ patches.<br />
<br />
==Dual-Stack==<br />
If you want both IPv6 and IPv4 addresses, just use IPv4 on one interface (e.g. interfaces/0) and create another interface (e.g. interfaces/1) with IPv6.</div>195.254.225.136http://www.linux-vserver.org/IPv6IPv62010-07-15T13:58:35Z<p>195.254.225.136: </p>
<hr />
<div>At the time of this writing, IPv6 support in guests requires you to apply an additional patch on top of the Linux-VServer patch. The IPv6 patch can be fetched from the official source: [http://people.linux-vserver.org/~bonbons/ipv6/ Bruno Prémont's IPv6 patches], and sometimes rediffs against later kernels are available from [http://people.linux-vserver.org/~dhozac/p/k/ my patch directory].<br />
<br />
To use the patch, you need util-vserver 0.30.212 or newer. These versions support IPv6 natively, so you just need to put the address in <code>/etc/vservers/<guest>/interfaces/X/ip</code> and start the guest to get it an IPv6 address.<br />
<br />
<br />
Starting with linux-vserver-2.3 IPv6 support is included in the main source code. No need to apply any extra patches. You will need to have util-vserver 0.30.214 or newer if you are using the 2.3+ patches.<br />
<br />
==Dual-Stack==<br />
If you want both IPv6 and IPv4 addresses, just use IPv6 on one interface and create another interface with IPv4.</div>195.254.225.136