Installation on CentOS

From Linux-VServer

Revision as of 11:45, 30 April 2007 by Mattzerah (Talk | contribs)

Jump to: navigation, search

Contents

Install CentOS 5

My CentOS 5 installation is a DVD install with only the "Desktop - GNome" group selected.

On restart, a number of questions (timezone/security level/etc) are asked. At this stage set the "SELinux" option to disabled. If you skip this step, then simply modify the /etc/sysconfig/selinux file and disable selinux from there. You will need to reboot before this takes effect, but its okay to wait until you have installed the kernel before doing this (just to save some time :)


Install the vserver kernel

I have found using Daniel's fedora kernel rpm's work great with CentOS 5, so I downloaded the relevent kernel RPMS files

wget -c http://rpm.hozac.com/dhozac/fedora/6/vserver/i386/kernel-2.6.20-1.2936.fc6.vs2.2.0.1.i686.rpm

Then install the kernel...

rpm -ivh kernel-2.6.20-1.2936.fc6.vs2.2.0.1.i686.rpm

Double check the grub file to make sure its the bootable kernel (/boot/grub/grub.conf). If all is okay we are ready to restart the server.

At this stage (before the reboot) I also modify the hosts sshd config file, so it doesn't listen to every interface on the server. This blocks any guests attempt to run sshd.

vi /etc/ssh/sshd_config

and add the line "ListenAddress 192.168.0.1"


Install util-vserver

At this stage I had to add c++ to my packages (its required to build util-vserver).

sudo yum install gcc-c++

Download the util-vserver source, unpack, configure and build the util-vserver code.

wget -c http://ftp.linux-vserver.org/pub/utils/util-vserver/util-vserver-0.30.212.tar.bz2
bzcat util-vserver-0.30.212.tar.bz2 | tar -x
cd util-vserver-0.30.212
./configure --prefix=/
make
sudo make install

Post installation steps

Make certain /proc entries visable (required every boot, so install the vprocunhide start script on boot)

sudo /sbin/chkconfig --add vprocunhid
sudo /etc/init.d/vprocunhide start


Install a guest

As root, try the following to test your installation (this example installs a fedora core 6 guest)

sudo vserver testing01 build -m yum --context 4040 --hostname=test01.test.loc \
--interface eth0=eth0:192.168.101.101/255.255.0.0 -- -d fc6


If all goes well you now have a working setup :)

Personal tools