Difference between revisions of "Limit Networking on Multihomed hosts"

From Linux-VServer

Jump to: navigation, search
(Created page with '== Situation == You have a multihomed host, e.g. DMZ and LAN or different DMZs and want a single VServer only to e able to send packets over a specific network. == Solution == I …')
 
m (Situation)
Line 1: Line 1:
 
== Situation ==
 
== Situation ==
You have a multihomed host, e.g. DMZ and LAN or different DMZs and want a single VServer only to e able to send packets over a specific network.
+
You have a multihomed host, e.g. DMZ and LAN or different DMZs and want a single VServer only to be able to send packets over a specific network.
 +
 
 
== Solution ==
 
== Solution ==
 
I used alternate routing tables:
 
I used alternate routing tables:

Revision as of 00:01, 14 January 2010

Situation

You have a multihomed host, e.g. DMZ and LAN or different DMZs and want a single VServer only to be able to send packets over a specific network.

Solution

I used alternate routing tables:

Once (tested on Debian):

echo 100 vservera > /etc/iproute2/rt_tables
echo 101 vserverb > /etc/iproute2/rt_tables

After rebooting (write an init script)

ip route add IP-VServer-A/mask table vservera dev ethA
ip route add default table vservera via Gateway-A
ip route add IP-VServer-B/mask table vserverb dev ethB
ip route add default table vserverb via Gateway-B

ip rule add from net-VServer-A/mask table 100
ip rule add from net-VServer-B/mask table 101
Personal tools